OK, just to make sure. The FSK signal on the ACC connector goes to pin 1, the PTT signal goes to pin 4 and the ground connection goes to pin 5. From your description I am not sure how you have everything wired. I use a box I made years ago that has the 15 pin connectors like the Y-box and 9 pin connectors for 2 serial ports with transistor switches for FSK and PTT. (Have been using this for years longer than the Y-box has been around. My WinKeyer is also old and doesn't do RTTY, but then I don't need it to. This is used on my K3, but the connector is the same of course.
On Wed, Jul 17, 2019 at 7:58 PM Kevin, N4TT <[email protected]> wrote: > I seem to be digging a deeper hole so it's time to come to the K3 experts > again. > > I'm still trying to get FSK (not AFSK) to work. My setup is a K3s, Y-Box, > WinKeyer and Fldigi. > > I think I have everything set up properly but something very strange is > happening. My CQ string is: > > <TX> > CQ CQ CQ de <MYCALL> <MYCALL> <MYCALL> > CQ CQ CQ de <MYCALL> <MYCALL> <MYCALL> pse k > <RX> > > What shows up on Fldigi when sending: > > CQ CQ CQ de N4TT N4TT N4TT > CQ CQ CQ de N4TT N4TT N4TT pse k > TT N4TT PSE K > > Note that last line. I don't know where it's coming from. And it is showing > up because tones are still being generated. The tone stops right after PSE > K (caps). > > I have another macro: > > <TX> > <CALL> de <MYCALL> <MYCALL> kn > <RX> > > It sends: > de N4TT N4TT kn > T KN > > The physical setup: > > WinKeyer PTT to Y-Box FSK-in (tied to Accy pin1) > WinKeyer KEY1 to Y-Box PTT-in (tied to Accy pin 4) > > Radio is in DATA FSK-D 45 bps. > > I'm not sure what else to try. > > 73, > Kevin N4TT > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
