Kev,
Do you have FlDigi set to produce audio tones in SSB mode for CW or is
it keying the K3 directly?
That will make a significant difference, and the P3 signal placement
will reflect that.
We did not consider that you were using a software application to
produce CW previously to this post.
Know what your software application is doing and you may have the answer
to your question.
73,
Don W3FPR
On 7/25/2019 2:41 PM, Kevin, N4TT wrote:
Hi Don:
I'm still checking things out but I think I have it all working
together. I calibrated the radio using WWV at 5, 10 and 15 MHz. I only
had to line up one and the other two fell right in. Then I went to the
P3 and lined that up with ref cal. Again, everything lined up at 5, 10
and 15.
Then I want back to fldigi which is where I originally noticed the
difference. I have the radio and fldigi set for a CW sidetone of 600
Hz. When I would tune in the radio for the 600 Hz tone on a random CW
signal, the peak of the P3 trace was right over the signal and Fldigi
showed the signal up at 600 Hz. Everything matched. This is what I
was looking for, the three functions matching.
I think I'm in good shape.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
