Thanks Don & Keith I'm going to replace both pots and do the wiring mod. Also saw in the archives where the earphone jack can be an issue and will replace that too.
73, Glenn KD0Q On Thu, Aug 15, 2019 at 4:03 PM Don Wilhelm <[email protected]> wrote: > All the pots in the K2 are sealed - no way for either dust or cleaning > fluids to get into the pot workings. > > To substitute a different variable resistor, one would have to remove > the pot from the board - may as well just change it. Order a new one > from Elecraft. > > 73, > Don W3FPR > > On 8/15/2019 4:26 PM, Keith wrote: > > The first thing you should check is dust on the control variable > > resistor. Using a different variable resistor will give you a quick > answer. > > > > 73, Keith > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
