"If setup according to the KAT500 manual (and using the appropriate cables), the KAT does follow the K3(S) TX frequency."
Thanks Wes, and to Dick for his earlier comments. I'll assume from now on that anyone saying the KAT500 and KPA500 follow the RX frequency of a K3(S), when TX freq not equal to RX freq, does not have the appropriate firmware or hardware configuration. The documentation could be a lot clearer though. For a rig that has two VFO and the ability to offset TX freq from RX freq by use of split, and/or RIT, and/or XIT, saying the KAT500 will "follow changes in the K3’s VFO frequency during receive" seems to be a somewhat inadequate description. 73, Andy, k3wyc ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
