I don't know about others, but when I got my K3 I did a lot of testing into a dummy load using my previous rig with a short piece of wire for an antenna to monitor my K3 audio. I found anything above about 25 for mic gain was objectionable, at least to me.
73, Dave AB7E On 8/28/2019 9:40 AM, Nate Bargmann wrote:
I received a note this morning advising that I should check my ALC as he is seeing some energy on USB when I check into a 75m voice net on LSB. I am using an MC-50 microphone and am running the mic gain at 35 and the compression at 11. My thinking was that generating opposite sideband energy would be quite difficult with the K3's DSP. Am I wrong? I'll try working with him some morning and back down the mic gain a bit and see what that does for him. 73, Nate, N0NB
______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
