Could you switch to “other” time slot so you don’t TX at same time? Sent from my iPhone ...nr4c. bill
> On Sep 11, 2019, at 5:02 PM, Ken Bandy, KJ9B <ken.k...@gmail.com> wrote: > > Hello. Is it possible to manually adjust anything other than the position > of the notch filter on the K3S. I recently was working FT8, when a ham > relatively close to me was desensing my receiver when working FT8 on the > same band. I was able to notch him out by manually setting the filter, but > it seems like a pretty wide notch, especially for FT8, and was wondering if > it was possible to adjust the width of the notch. I didn't see anything in > the manual regarding adjustment of the width. > > > > Thanks and 73, > > Ken, KJ9B > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com