He says he has a K3S. They don't need the mod.
On 10/4/2019 10:43 AM, Don Wilhelm wrote:
Fred,
Have you looked the K3 IF Output mod?
https://ftp.elecraft.com/K3/Mod%20Notes%20Alerts/IF_Output_Buffer_Gain_Mod_Rev_A.pdf
If you don't have the 13k SMD resistor or a 1/8 watt 13k resistor, you can
order the kit from Elecraft.
73,
Don W3FPR
On 10/4/2019 1:24 PM, Fred Massey wrote:
Good afternoon Wes and all,
If I connect the antenna directly to the QSR-1, I get the same signal level
as the K3s. But, when I connect to the QSR-1 to the IF-out, the signal is
about 4 s-units less.
Any ideas...anyone?
Fred
O
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
