Sri, when selecting coarse to 7.0264 not 7.02644. Fat fingers 73, Bill WE5P
> > On Oct 17, 2019 at 08:31, Bill Weaver <[email protected]> wrote: > > > Bob, I just tested it. It looks like the undisplayed digits are retained. My > example 7.02647. Select coarse 7.02644 tune around and return to 7.0264 and > select medium returns to 7.02647. 73, Bill WE5P > > On Oct 17, 2019 at > 08:23, Bob Novas via Elecraft wrote: > > > When the K3s is in Coarse > tuning mode, showing 100 Hz steps, are the 10 Hz and 1 Hz settings retained > from wherever they were, or are they jammed to 0's? In other words, if the > dial reads 7010.1, is the K3s running on the frequency 7010.100 or possibly > 7010.1?? where the ?? are whatever happened to be dialed in before going to > Coarse tuning? Thanks, Bob Novas - W3DK > ______________________________________________________________ Elecraft > mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: > http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This > list hosted by: http://www.qsl.net Please help support this email list: > http://www.qsl.net/donate.html Message deliver! ed to wea [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
