The undisplayed digits are used, i.e. the freq does not shift to the displayed 100Hz. In my example the freq (while listening to a CW QSO) did not shift but stayed at 7.02647 Khz.
73, Bill WE5P > > On Oct 17, 2019 at 08:59, Bob Novas <[email protected]> wrote: > > > > > But, the question is - are the undisplayed digits retained but not used, or > are they actually utilized in determining the frequency? I’ve been setting > my readout to xxxx.x00 before switching to Coarse, on the fea that the > undisplayed digits actually are used in determining the Rx/Tx frequency, but > there’s nowhere that says one way or the other that I can find. Bob - W3DK > > > > > > > > From: Bill Weaver [mailto:[email protected]] > Sent: Thursday, October 17, 2019 8:34 AM > To: Bill Weaver; Bob Novas; Bob Novas via Elecraft > Subject: Re: [Elecraft] Question on frequency when in fine/medium/coarse > > > > > > > > > > Sri, when selecting coarse to 7.0264 not 7.02644. Fat fingers > > > > > > 73, > > > > > > Bill WE5P > > > > > > > > > > > > > > > > On Oct 17, 2019 at 08:31, Bill Weaver <[email protected]> wrote: > > > > > > > > > > > > > > > > Bob, > > > > > > > > > > > > > > > > I just tested it. It looks like the undisplayed digits are retained. My > > example 7.02647. Select coarse 7.02644 tune around and return to 7.0264 and > > select medium returns to 7.02647. > > > > > > > > > > > > > > > > 73, > > > > > > > > > > > > > > > > Bill WE5P > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On Oct 17, 2019 at 08:23, Bob Novas via Elecraft wrote: > > > > > > > > > > > > > > > When the K3s is in Coarse tuning mode, showing 100 Hz steps, are the > > 10 Hz and 1 Hz settings retained from wherever they were, or are they > > jammed to 0's? In other words, if the dial reads 7010.1, is the K3s running > > on the frequency 7010.100 or possibly 7010.1?? where the ?? are whatever > > happened to be dialed in before going to Coarse tuning? Thanks, Bob Novas - > > W3DK ______________________________________________________________ > > Elecraft mailing list Home: > > http://mailman.qth.net/mailman/listinfo/elecraft Help: > > http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This > > list hosted by: http://www.qsl.net Please help support this email list: > > http://www.qsl.net/donate.html Message delivered to weaverwf@usermailcom > > > > > > > > > > > > > ______________________________________________________________ > > > > Elecraft mailing list > > > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > > > Help: http://mailman.qth.net/mmfaq.htm > > > > Post: mailto:[email protected] > > > > > > > > This list hosted by: http://www.qsl.net > > > > Please help support this email list: http://www.qsl.net/donate.html > > > > Message delivered to [email protected] > > > > > > > > > > > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
