When using SPOT to have the radio tune to a received signal, the
following is the result: the radio tunes to the received signal
correctly as indicated by the CWT graph, but this frequency is some
50-100cps below the selected side tone frequency. In other words, after
auto tuning, if PITCH is selected, the side tone pitch is significantly
higher than the received CW pitch to which the radio has auto tuned
[hope this is clear]. The particular side tone pitch selected doesn't
effect this result. EG, select 450cps side tone pitch and the radio
tunes to around 400cps Note, this is after the radio has been through
Elecraft maintenance for another problem and subsequently certified as
operating within specs. What's happening?
...robert
--
Robert G Strickland, PhD ABPH - KE2WY
[email protected]
Syracuse, New York, USA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
