You don't have the shift off center do you? Of course I've never done that before :-).
73, Bill WE5P > > On Oct 21, 2019 at 19:40, Robert G Strickland via Elecraft > <[email protected]> wrote: > > > When using SPOT to have the radio tune to a received signal, the following > is the result: the radio tunes to the received signal correctly as indicated > by the CWT graph, but this frequency is some 50-100cps below the selected > side tone frequency. In other words, after auto tuning, if PITCH is selected, > the side tone pitch is significantly higher than the received CW pitch to > which the radio has auto tuned [hope this is clear]. The particular side tone > pitch selected doesn't effect this result. EG, select 450cps side tone pitch > and the radio tunes to around 400cps Note, this is after the radio has been > through Elecraft maintenance for another problem and subsequently certified > as operating within specs. What's happening? ...robert -- Robert G > Strickland, PhD ABPH - KE2WY [email protected] Syracuse, New York, USA > ______________________________________________________________ Elecraft > mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: > http://mailma! n.qth.net /mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
