Mikael,
One more thing - make sure you are comparing 80 and 160 equally. Do you
have the preamp on for both bands, or off for both bands?
Preamp on/off is a per band setting.
73,
Don W3FPR
On 11/8/2019 3:01 PM, Mikael Larsmark wrote:
Hi,
I am having an issue which confuses me quite a bit. When I unplug my antennas
and listen to 80m for example I have very low noise and the S-meter does not
light up a single bar. When I go to 160m and do the same thing I have S3-S4 and
I can hear a much higher noise level. It is the same behavior regardless if I
use the RX antenna or the ANT1 jack (none with any antenna). I have the same
settings on both bands.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
