Thanks Jay!
Correct email address: [email protected]
Typing too fast today..
Eric
/elecraft.com/
On 11/8/2019 2:39 PM, Jay Rutherford wrote:
Eric,
Typo on "[email protected]"
73 Jay K3BH
On Fri, Nov 8, 2019, at 16:27, Eric Swartz - WA6HHQ, Elecraft wrote:
Hi Mikael,
Make sure you reload your saved K3 configuration file to the radio after an
EEINIT. (EEINIT clears all of the radio calibration values and any menu items
you have changed.)
If you didn't save the K3 radio config file first, contact [email protected]
for our saved K3 configuration file from when your radio was manufactured.
In general, EEINIT is not something you want to do without talking to our
support techs first.
Eric
/elecraft.com/
On 11/8/2019 12:01 PM, Mikael Larsmark wrote:
Hi,
I am having an issue which confuses me quite a bit. When I unplug my antennas
and listen to 80m for example I have very low noise and the S-meter does not
light up a single bar. When I go to 160m and do the same thing I have S3-S4 and
I can hear a much higher noise level. It is the same behavior regardless if I
use the RX antenna or the ANT1 jack (none with any antenna). I have the same
settings on both bands.
I also tried to do a factory reset but behavior remains.
Any idea what this can be?
/Mikael, SJ2W
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
