Thanks for the good advice. I have now seen the voltage drops to 2.3 V on the battery when the K2 is powered on, even though it's close to 11 V charged. So I have ordered a new battery and will see if that resolves it.
73 Robin -----Original Message----- From: Don Wilhelm <[email protected]> Sent: Sunday, 10 November 2019 19.24 To: Frank Krozel <[email protected]>; hawley, charles j jr <[email protected]> Cc: [email protected]; [email protected] Subject: Re: [Elecraft] Battery pack not powering K2 Frank, Yes, that is the battery supplied by Elecraft. If you do not have the battery installed, you may also be missing the thin foam strip that is to go between the battery and the bracket. Nothing really special, and if you have some of that material on hand, just cut it the size of the battery. The foam pad makes the battery a bit more secure when installed in the bracket (i.e no rattling). 73, Don W3FPR On 11/10/2019 1:15 PM, Frank Krozel wrote: > Mine is missing the battery, I was told it is a Powersonic PS-1229 for > my K2 > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
