Bob N6TV made a very nice presentation a few years ago, which included a description.
He has published it here http://tinyurl.com/4zama4 73, Björn SM7IUN Den mån 18 nov. 2019 kl 23:04 skrev N4ZR <[email protected]>: > I was just asking myself the same question. There is probably a drawing > in the Cady book, but the best explanation in the manual is in words, > not pictures, on page 39. In any case, you are exactly correct in your > description of the RX Out-Splitter-RX In loop. The only downside is a > loss of 3-4 dB due to the splitter, and the fact that you're taking up > the RX In jack which you might otherwise use for a receiving antenna. > You must select the RX antenna to connect the IN/OUT loop to the main > antenna > > 73, Pete N4ZR > Check out the Reverse Beacon Network > at <http://reversebeacon.net>, now > spotting RTTY activity worldwide. > For spots, please use your favorite > "retail" DX cluster. > > On 11/18/2019 11:06 AM, Dave Cole wrote: > > A few years ago someone posted a method of using a splitter, and the > > External Antenna jacks to feed an external SDR with the direct > > antenna, not a IF, but a wideband signal from the primary antenna... > > > > I think it was something along the lines of add a splitter, between > > the RX Antenna in/out, and then picking off the antenna feed to the > > SDR from an output of the splitter... Does this make sense? > > > > Is there a high level block diagram showing the antenna pathing for a > > K3, with the ATU installed, and how the front panel switch labeled RX > > ANT controls the signal path? > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
