Ok, thanks. I can fix it! I have another amplifier/splitter I can put on it. I didn't remember that there was an addition manual for the K3REF
:-( 73, Dave On Thu, Nov 21, 2019 at 3:40 PM Grant Youngman <[email protected]> wrote: > It’s in the K3XREF manual. +4 to +16 dBm. Your reference doesn’t have > enough output. > > Grant NQ5T > > > On Nov 21, 2019, at 3:33 PM, Dave Sublette <[email protected]> wrote: > > > > I have a K3s, delivered in January this year. I am using an external GPS > > disciplined 10 Mhz reference to the External Ref input on the back. I > > cannot find anywhere in the manual what the required level for this input > > is. I have -1.1 dBm and it seems to work. However, once in a while, the > > K3s frequency shifts down 10 hz, then back to the original frequency, > then > > up 10 hz, then back to original frequency, all in a matter of two t four > > seconds. This happens maybe once a week and lasts for a minute or > two. I > > have never heard it do more than one sequence of down-back-up-back at > > time. > > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
