Ed, et.al., I did get my instructions out for the EXTREF. I had forgotten that there were extra sheets for that. I use an HP Z3801 through an 8 way splitter and run the 10 MHz from the garage to the shack, a fifty foot run, on .14 in diameter 75 ohm cable. I also put a 1:1 isolation transformer in that line before it left the garage.
By the time it got to the shack, there was only -1.0 dBm left. So I took my DEMI 4 output box and tried that. It wouldn't put out more than +2 dBm to the K3s. So, I hacked the circuit board, taking one of the four circuits and using it as a driver for the other three. I now get 12.5 dBm drive to the K3s. All the asterisks are lit. All appears to be working as advertised. Thanks for all the advice. It helps to know I am not alone in making these sorts of decisions. 73, Dave, K4TO ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
