Reload the firmware.

73 Eric WD6DBM

On Mon, Nov 25, 2019, 6:51 PM VK5GR <vk5gr.ra...@gmail.com> wrote:

> FAN CTL = NOR
>
> FANs are idle while the amp is turned on - amp ambient temp was 27C at the
> time (it was powered up and had been idle for about 20 minutes).
>
> I then turned the amplifier off via the front panel push button. I would
> have expected the FANs to start up for about 10 seconds as they discharge
> the 60V rail supply but instead the FANs continue to run. the only way to
> turn them off is to unplug the amp from the mains supply.
>
> It is definitely a fault condition and not a menu selection.
>
> Thoughts?
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to norrislawfi...@gmail.com
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Reply via email to