Add to my earlier. You may need to adjust levels as previous version and this one will be different.
Also suggest you use CAT control and not VOX as CAT is not affected by audio levels. 73 Bob, K4TAX Sent from my iPhone > On Dec 2, 2019, at 11:23 AM, [email protected] wrote: > > Hola, > > Problem with keying the VOX on the K3s with new install. Select "Tune", > it turns red but xmtr does not key VOX. > > Never had this problem with v 2.0.0. Double checked USB audio codex for > both speaker and microphone. Parameters checked for Radio tab, K3s, > using usb from KIO3 to computer, com4 (doublechecked Device manager for > correct port), VOX tab checked, 38400 and 8-1-none for Data/stop/handshake. > > Line in selected at 30 on K3s along with Vox gain at 30 (same as > before). K3s mode selected for TX data and Data A menu selected. > Received and decode FT8 no problem, still no xmit with VOX. > > Do not see where I can go back to v2.0.0 as it no longer appears on > WSJT-x website. > > Suggestions? > 73 > Tom > HP1XT > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
