Mike...
I have this connection working. However, I use a microHAM CW interface
between the radio and computer with its router software [sets up virtual
ports and WinKey functionality] . This setup works cleanly and reliably.
I'm no expert in this area, but my reading here on the list prompts me
to say that a direct computer-to-radio setup for the K2 may not be
possible. I'm sure others with expertise will help you out.
...robert
On 12/14/2019 19:33, NJMike wrote:
I am trying to setup my K2 with N1MM Logger so that I can send CW and phone
from my Windows 10 tablet to the K2. I have the KIO2 cable built and just
purchased the KUSB converter.
I updated the driver for the converter (although I find no instructions that
say this needs to be done).
N1MM Logger now follows the radio band and correctly logs the contact.
However, I cannot send CW from N1MM Logger to the K2. I get the following
error message at the bottom of the Entry window: "Unable to send this CW
because there is no CW port set in Config: "
The user manual for N1MM Logger makes this comment: "N1MM Logger does not
support the K2 “virtual keying” feature using commands sent to the K2 serial
port."
So I am confused as to whether or not it is even possible to set this up.
Has anyone been able to do this? Any help is appreciated, and thanks!
Mike
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
--
Robert G Strickland, PhD ABPH - KE2WY
[email protected]
Syracuse, New York, USA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
