Don W3FPR wrote:
Yes there is one 'tool' that is assumed for the alignment steps, and that
is
a dummy load. Every hamshack should have one. If you don't have one
already, I suggest the Elecraft DL1.
-------------------------------------------------------------------------
Also very useful when the rig is up and running. I'm not certain about the
K2's antenna tuner, but the KAT100 has two antenna coax connectors and I
keep a dummy load connected at all times to the 'Antenna 2' connector. By
switching to ANT 2 the K2/100 can be checked quickly at full power without
causing annoying QRM, although leakage across the KAT100's relay does allow
a milliwatt or so to get to the antenna feeder connected to the 'Antenna 1'
connector.
73,
Geoff
GM4ESD
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
