On 1/4/2020 2:24 PM, Wayne Burdick wrote:
I could cobble something together from several different vendors, but I'd
prefer to purchase system components that are already proven, reliable, and
reasonable in cost. Any recommendations?
I and many of my friends are using LiFePO4 batteries from Bioenne Power
with a Genasun charge regulator. Most high efficiency charge regulators
are mucho noisy, but this one is not. The two k3s on my operating desk
run on a 100Ah battery, which is float charged by a spare Thinkpad PSU.
It's rated for 20V @ 4.5A, and the charge regulator, which is an MPPT
type, down-converts it to the 14.5V or so that the battery wants to see.
This is enough to more than keep up with SO2R when the rigs are driving
a KPA1500 and an 87A, or a pair of 87As. Under load, the K3 voltmeter
stays above about 13.4V.
I own two 20Ah batteries for portable work; W6GJB owns a much smaller
one (4Ah) that he uses to power a KX3 for WSPR antenna testing. Petr,
AG6EE, owns a 50Ah battery that runs his KX3/KXPA100 for mountaintop VHF
work, and a 48V that runs a 6M kW amp sold by M2. I think the 48V
battery is 50 or 100 Ah. The weekend after Christmas, Petr was set up in
this National Monument https://www.nps.gov/orpi/planyourvisit/maps.htm
to work Meteor Scatter from this very rare grid along the US/Mexico
border. No generators are permitted, hence the big battery for the power
amp.
All of these batteries are Bioenne Power with LiFePO4 chemistry with
built-in circuitry to equalize the cells. They are very good people to
work with.
They also sell a much cheaper and simpler hysteresis charger for use
with their batteries.
73, Jim K9YC
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
