Back in early December, I installed two KSYN3As in my K3 SN 7071. Sometime after that, I noticed that on 12m, I’m seeing a HI CUR indication when I set the power level to more than about 80-85 watts. The K3 will back off on the power level, then slowly ramp back up until it hits HI CUR again.
I don’t remember seeing this before. After the KSYNC3A install, I ran the transmit gain calibration at both 5 and 50 watts, as specified in the instructions. Just in case something went awry, I ran it again. I’m still seeing this problem. What causes HI CUR at 85 watts? The K3 ought to be able to produce over 110 watts on 12m. I’m not seeing this issue on other bands. No issues with calibration Bill Coleman, AA4LR, PP-ASEL Mail: aa...@arrl.net Web: http://boringhamradiopart.blogspot.com Quote: "Not within a thousand years will man ever fly!" -- Wilbur Wright, 1901 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com