My K-Pod has stopped working ... it works (macros are functional) for a few minutes after K3S turned on and then power light is out and button functions do not work! Turn rig off and back on a few minutes later and it functions, for awhile.
I have reloaded full firmware for both K3S and P3 ... no behavioral change. I have disconnected K-Pod cable at both rig and K-Pod, re-connect, no change. Cable is connected in jack under front panel. Otherwise, K3S is fully functional. I am aware the “macros” reside within the K3S. Could this be the cable between the rig and K-POD? Any ideas to remedy this situation will be greatly appreciated. Direct reply to [email protected]. Thank you, John WA4AIP K-LINE Station ARRL Charter Life Member ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
