Eric,
Send an email to FAR Circuits to see if they have the N0SS Amp Keying
Circuit for the K2 available.
If you must go the perfboard route, it is not difficult if you follow
the board layout shown on Tom Hammond's (SK) website
http://www.mmccs.com/mmarc/n0ss/index_k2.html. Most of the connections
can be made using bent over component leads if you follow Tom's board
layout.
There are few other viable alternatives to sourcing the output from the
8R signal line.
73,
Don W3FPR
On 2/4/2020 8:48 PM, eric norris via Elecraft wrote:
Dear Gang:
I know one could take the PTT signal from the now-discontinued K60XV board, and
it is provided on the K2/100 lid, but are there any other option boards that
one can use to provide an external PTT signal?
If not, is anyone making the N0SS ptt out boards? I'm trying to avoid the
perfboard route.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
