I believe Elecraft has to cable you need. Sent from my iPhone ...nr4c. bill
> On Feb 17, 2020, at 6:07 PM, W4IEN <[email protected]> wrote: > > I have a problem that I am sure some of you have run into. I am trying to > use my K3S remotely using a K3/0 with the RemoteRig 1258 MKIIs hardware. I > can get everything set up except for the connection from the RS232 to the > RS232 on the RemoteRig hardware. The RS232 on the K3S does not have the same > type of connector as the RemoteRig hardware. Has anyone gotten around this > problem. Any help would be appreciated. Hope I explained my situation well > enough so it is understandable. > > 72/73, > EM73vx > Robin > G-QRP #12386 > SKCC #7294 > W4IEN > [email protected] > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
