Line In is selected, I should have included that in my original posting. 73, Joe N9OK
On Sun, Mar 15, 2020 at 11:42 AM Joe N9OK <[email protected]> wrote: > Hi, I've recently upgraded my K3 with numerous upgrades including a KIO3B > board. I've successfully configured most of what I need but RTTY has been a > problem. > > What I see is that I am able to transmit power in RTTY mode if my K3 is > set into *DATA A* mode. If I set my K3 to *AFSK A* mode, the radio has > the appearance of transmitting in RTTY mode but there is no power. IE, TX > illuminates, the ACL meter moves. But Monitor is silent and there is no RF > power. MIC gain is set the same for both modes. VOX is set for both (not > PTT). > > The problem first showed up in DXLAB WinWarbler. However, I've confirmed > the exact same problem occurs when I am running a stand-alone MMTTY > executable. > > I realize that I could use an external FSK interface. But I"m looking for > a simple setup, and the documentation I've seen indicates that I should be > able to obtain output power using *AFSK A* mode. > > It appears to me that there is an audio routing issue in my K3. However, > that seems unlikely, as others would have reported the issue and it would > have been corrected. What I'm hoping is that there is a simple setup issue > that someone can direct me towards. > > Any ideas would be extremely appreciated. > > 73, Joe N9OK > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
