Can't figure out how to reply to your post Rich in your thread. Audio Mark and Shift in MMTTY are identical to the Pitch control settings in my K3. MAIN:AFSK TX is set to Filter On. This makes no difference for my transmit power, however.
73, Joe N9OK On Sun, Mar 15, 2020 at 12:06 PM Joe N9OK <[email protected]> wrote: > Line In is selected, I should have included that in my original posting. > 73, Joe N9OK > > > On Sun, Mar 15, 2020 at 11:42 AM Joe N9OK <[email protected]> wrote: > >> Hi, I've recently upgraded my K3 with numerous upgrades including a KIO3B >> board. I've successfully configured most of what I need but RTTY has been a >> problem. >> >> What I see is that I am able to transmit power in RTTY mode if my K3 is >> set into *DATA A* mode. If I set my K3 to *AFSK A* mode, the radio has >> the appearance of transmitting in RTTY mode but there is no power. IE, TX >> illuminates, the ACL meter moves. But Monitor is silent and there is no RF >> power. MIC gain is set the same for both modes. VOX is set for both (not >> PTT). >> >> The problem first showed up in DXLAB WinWarbler. However, I've confirmed >> the exact same problem occurs when I am running a stand-alone MMTTY >> executable. >> >> I realize that I could use an external FSK interface. But I"m looking for >> a simple setup, and the documentation I've seen indicates that I should be >> able to obtain output power using *AFSK A* mode. >> >> It appears to me that there is an audio routing issue in my K3. However, >> that seems unlikely, as others would have reported the issue and it would >> have been corrected. What I'm hoping is that there is a simple setup issue >> that someone can direct me towards. >> >> Any ideas would be extremely appreciated. >> >> 73, Joe N9OK >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
