It is not necessary to use VOX if the TX command is configured correctly
in MMTTY. I run MMTTY direct and do not use N1MM+ or other
applications. The reason for me NOT using VOX is that I use VOX for
other operations and don't like having to change the VOX settings for
MMTTY. Of course if one doesn't use VOX for SSB then set the values
for MMTTY and carry on.
73
Bob, K4TAX
On 3/21/2020 12:37 PM, M. George wrote:
Joe, I can confirm the same success for using AFSK A with VOX to key the
radio... and just for kicks and giggles... I have a K3S and a K3, the K3
has the KIO3B install and I tested the AFSK A setup with MMTTY and N1MM on
both radios. *The conjecture / reports that it only works on a K3S is a
total red herring as Wes and Rich have reported? Wow that is a tangent for
sure...* They (K3S/K3 with the USB KIO3B) work exactly the same gents,
there is nothing magical about the K3S. I actually made a quick and dirty
YouTube video for you (Joe N9OK) and I'll send you the link to the video as
soon as it's published. It walks you would a setup for AFSK A direct with
MMTTY and shows a test... and shows you all the configuration screens so
you can pause the video and compare to your setup. I then reference that
instance of MMTTY in N1MM and show the setup there.... and I work some
stations... all using AFSK A on a K3 with the the KIO3B using VOX to key
the radio. It's a March miracle.
Max NG7M
On Sat, Mar 21, 2020 at 10:57 AM Richard Ferch <[email protected]> wrote:
Like Wes, I have an original K3 which I have been using in AFSK-A for
years. I use N1MM+ with either MMTTY or 2Tone as the RTTY "engine". A few
months ago I installed the KIO3B upgrade in my K3. After I installed the
upgrade, AFSK-A RTTY worked right from the start using the USB audio codec.
I had no difficulties in getting it going.
73,
Rich VE3KI
N9OK wrote:
Jim,
Thank you very much for confirming that what I see isn't due to a broken
K3.
I agree that if firmware can fix this, it would be very nice. Elecraft had
this particular feature listed in the feature set for the upgrade, IIRC,
which is a large reason I splurged on the upgrade. I didn't want any more
external interface confusion.
On to configuring for FSK and perhaps playing in BARTG a little.
73 Joe N9OK
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
