Hi Everyone.
I've been trying to get my SDRPlay (w/ SdrUno) to work with the IF output of my K3S. I've got OmniRig set up, so the K3S and SdrUno interact properly. Well, almost. There seems to be an offset between the K3S frequency and the SdrUno frequency. For example, I dial in WWV at 10 MHz on the K3S, and SdrUno hears the signal at ~9.875 MHz. On 80m, this offset is around 117KHz. I've tried the setting the External Converter offsets, that didn't help. In SdrPlay, I do have the IF Output Frequency set to 8125000 Hz and it is enabled. I've tried adjusting this value a little, and it didn't seem to help. I am aware of some of the limitations of SdrUno compared to other software, but this is the one that I'm used to. I may switch to another one at some point. Any ideas? I looked through the K3S config settings, and nothing jumped out at me. Thanks! 73, Don W7OXR ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
