George; That message occurs because something is loading the Auxbus when the K3 is powered on. Make sure that the KAT500 and the XV144 are both powered up when you turn on the K3. They can be powered on at the same time, but the task needs to be done before the K3 enumerates the Auxbus, which is done in the latter part of its power-up sequence.
There may be a further issue with this setup, however. Whenever the KAT500 decides it needs to do a tune, it will disconnect the Key line from its AUXIO output port. This is needed to cause the KPA500 to drop out of transmit. You don’t have a KPA500, but you do have an XV144 connected to that port, which will also drop out of transmit at that time. While you probably won’t see this issue, it is best to use a real AUXIO Y cable (15 pins straight through between all three connectors) to connect both peripherals to your K3. 73! Jack, W6FB > On Apr 16, 2020, at 5:51 AM, George Kidder <[email protected]> wrote: > > GM, > > I am trying to get my K3 - KAT500 combination (which works well alone) to > accept the addition of a XV144 (which works well with the K3 alone). Having > to plug and unplug control cables to switch from HF to VHF is a non-starter. > I had hoped to pick of the control for the XV144 from the "AMP" socket on the > KAT500, but when this is done, I get the message "turn on KAT500" on the K3 > display, and nothing works until the plug is removed from the XV144. > > I have contacted Support about this, but thought I would also see if the > collective wisdom of this group can give any guidance. > > Thanks for your consideration, > > George, W3HBM (hunkered down at home in ) Bar Harbor, ME > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
