Mike,
The amp will fit just fine with your current configuration. Although, the
KAT2 and KIO2 boards will stay with the original top cover. The KPA100
includes the KIO2 circuitry. If you need an ATU for use with the KPA100,
then you will want a KAT100 ATU or other brand that can handle 100+ watts.
Hope this answers your question.
73,
Dave, W8FGU
On April 27, 2020 14:18:04 NJMike <[email protected]> wrote:
I built K2 #4619 some years ago. Now I am considering adding the KPA 100
amplifier. When I bought and built the K2, I also built and installed the
following option3:
KAT2 automatic antenna tuner
KSB2 SSB adapter
KDSP2 DSP filter and internal clock
KIO2 AUX I/O module
KNB2 noise blanker
K160RX 160 meter module
MH2 microphone
On the technical side, I need to know if the amp can be installed after
installing all these options.
On the purchasing side, I guess my options are purchasing from Elecraft for
$650 (which I am sure is worth the price), or buying one from someone who
bought one but never built it. I am retired now so I'm trying to spend as
little as I can.
Please let me know if you have one that you'll sell, and if you know the
answer to the first question.
Thanks!
Mike NJ2OM
--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
