Hi to the group I have camped for many years and years ago set up my station for remote operation and had some fun. The setup was complicated and I changed computers and other station equipment and have not used it remotely for about the last five years. I bought the MFJ1234 about a month ago and now have it set up and working. I was able to set up 15 macros on the MFJ1234 and now have only the one connection to the K3s and can leave it hooked up while using both local and remote control. The only problem I see is I need to change the MIC SEL from rP.L b1 A5 to Line I n for remote control. I have not found a way to set up a macro to do that. That would be my first wish is if someone knows how to set up a macro to make that change if I forget to do it before I leave home.
The other option would be to get the K3 UTILITY program to run on the MFJ1234. I was able to download the program to the MFJ1234 but can not figure out how to install it and make it run. I have already been able to set up configuration files on my Windows 10 computer for both setups and think I could do the same thing using the RASPBERRY PI remotely. Does anyone else know if the K3 UTILITY will run on the RASPBERRY PI and if so how do I install it and make it work? This was complicated to set up but works much better than what I used several years ago. I can work 7 bands from 160 to 10 meters both SSB and CW using it. I can work CW without that last step but I would like to be able to fix my problem if I forget to do it before I leave the house. All I have to take with me is my iPhone. Thanks for any advice. Ken W0CZ Sent from Mail for Windows 10 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
