I'm using a RemoteRig RRC-1258 pair in my remote setup, not an MFJ1234. I parallel the mic output of the RRC with the station local mic line, plugged into the K3 MIC connector, and it seems to work for what little SSB I do. I've not made any measurements of interfering ambient noise, but haven't heard any complaints.
73, /Rick N6XI On Mon, May 11, 2020 at 2:23 PM Kenneth A Christiansen <[email protected]> wrote: > Hi to the group > > I have camped for many years and years ago set up my station for remote > operation and had some fun. The setup was complicated and I changed > computers and other station equipment and have not used it remotely for > about the last five years. I bought the MFJ1234 about a month ago and now > have it set up and working. I was able to set up 15 macros on the MFJ1234 > and now have only the one connection to the K3s and can leave it hooked up > while using both local and remote control. The only problem I see is I need > to change the MIC SEL from rP.L b1 A5 to Line I n for remote control. I > have not found a way to set up a macro to do that. That would be my first > wish is if someone knows how to set up a macro to make that change if I > forget to do it before I leave home. > > The other option would be to get the K3 UTILITY program to run on the > MFJ1234. I was able to download the program to the MFJ1234 but can not > figure out how to install it and make it run. I have already been able to > set up configuration files on my Windows 10 computer for both setups and > think I could do the same thing using the RASPBERRY PI remotely. Does > anyone else know if the K3 UTILITY will run on the RASPBERRY PI and if so > how do I install it and make it work? > > This was complicated to set up but works much better than what I used > several years ago. I can work 7 bands from 160 to 10 meters both SSB and CW > using it. I can work CW without that last step but I would like to be able > to fix my problem if I forget to do it before I leave the house. All I have > to take with me is my iPhone. > > Thanks for any advice. > > Ken W0CZ > > Sent from Mail for Windows 10 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > -- -- Rick Tavan Truckee and Saratoga, CA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
