I tried setting SPKRS = 1 with no change. I plugged the two external speakers back in, and they are working normally.
On Sun, May 17, 2020 at 1:09 PM Ron Manfredi <[email protected]> wrote: > Try the default for speakers; set it to "1"? > > Ron WA2EIO > > > > On 5/17/2020 2:00 PM, Chuck Chandler wrote: > > We are in the process of packing to move and I have to down-size the mess > > on my operating desk. As part of that the K3S was moved back and forth, > > and I removed the two external speakers I had been using. > > > > Now that I've done that I get no audio when the headphones are unplugged > > from the front jack. The rear phones and speaker jacks are now empty. > > > > Menu CONFIG:SPKRS = 2 > > Menu SPKR+PH = no (but setting to YES doesn't make the internal speakers > > work either) > > PH.R SW is set to -- > > > > I've looked at the manual and the Cady book, nothing jumps out at me. > > > > Any other buttons to push before I take the cover off? > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] -- 73 de Chuck, WS1L [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
