To put a K3(S) into Split mode for DATA, both VFOs must be in same Mode/Submode before initiating Split. Easy way is to tap A=B twice quickly to copy frequency and other settings to VFO B.
Sent from my iPhone ...nr4c. bill > On May 25, 2020, at 7:56 PM, Conrad PA5Y <[email protected]> wrote: > > Hi all. I use the WSJT-X split mode with my K3S on 6m to ensure that if I > wish to TX with a low audio tone I will not have audio harmonics in the > passband of the TX filter. This works very well. However when I tried it on > 2m with my K3S and a transverter I get a message SPLIT N/A. Is this a menu > setting that I am not aware of? I have checked that Diversity is not on for > the XV-2 which is what I use for 2m. > > It is a very useful feature when it is busy as I can often find a gap low > down or very high. > > Any help appreciated. > > 73 > > Conrad PA5Y > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
