Thanks to all who helped with this. It appears that VFO B was on a different mode when I selected 144 MHz XV-2. So copying A>B worked fine and now I have split on 144MHz as well. It's a mistake that you only make once and will never be forgotten!
73 Conrad PA5Y ________________________________ From: [email protected] <[email protected]> on behalf of Conrad PA5Y <[email protected]> Sent: 26 May 2020 01:54 To: [email protected] <[email protected]> Subject: [Elecraft] WSJT-X and Split operation with transverters Hi all. I use the WSJT-X split mode with my K3S on 6m to ensure that if I wish to TX with a low audio tone I will not have audio harmonics in the passband of the TX filter. This works very well. However when I tried it on 2m with my K3S and a transverter I get a message SPLIT N/A. Is this a menu setting that I am not aware of? I have checked that Diversity is not on for the XV-2 which is what I use for 2m. It is a very useful feature when it is busy as I can often find a gap low down or very high. Any help appreciated. 73 Conrad PA5Y ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
