It works ok until the battery gets to 11 Bolts under TX. Note: as voltage goes down the current goes up and as voltage goes down the IMD also goes up.
My club uses two batteries on series and a buck converter to control voltage to 14 volts. Sent from my iPhone ...nr4c. bill > On May 27, 2020, at 11:54 AM, Doug Faunt N6TQS +1-510-717-1197 > <dougfa...@gmail.com> wrote: > > How well does the K3 work with lower power supply voltage, such as > from a deep cycle battery after some hours of use? > I'm looking at resurrecting my station for FD, as 1E. > Relearning the K3 would probably be easier than learning the KX3. > 73, doug > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com