All:
I have a follow-up question regarding balanced mics and unbalanced
connections. I'm about to connect a balanced dynamic microphone (Heil
PR-781) to the rear mic input on my K3S which has a 1/8" unbalanced mono
connection.
One recommendation was to connect XLR pin #2 mic (+) to the tip of the
1/8" jack and pin #3 mic (-) to the sleeve. In this case, pin #1 or
ground is left floating with no connection. A 1/8" mono jack was
recommended for this setup.
The other recommendation was to connect pin #2 to the tip and pin #1 and
#3 to the sleeve of the 1/8" jack. It was also suggested that I can use
either a 1/8" mono or a stereo TRS jack in both cases.
So which is correct?
Tony -K2MO
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
