Are we speaking of the same L34? Mine "peaked" at nearly the top,
not a turn or so from the top. As I remember I was peaking for the
loudness of the noise; nary a signal around.
de Joe, aa4nn
-----------------------------------------------------------
----- Original Message -----
From: "Dan Barker" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Saturday, July 01, 2006 6:49 AM
Subject: RE: [Elecraft] K2 IF Alignment Question
You are not adjusting for the peak, you are adjusting for the maximum
signal/noise. It does not occur at the peak signal. Unless you are using
Spectrogram or some such, it is a trick to do by ear.
That said, if your best S/N is at the top, I haven't a clue if you have a
problem<g>.
Dan / WG4S / K2 #2456
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED]
Sent: Saturday, July 01, 2006 12:57 AM
To: [email protected]
Subject: [Elecraft] K2 IF Alignment Question
The peak when adjusting L34 during IF alignment is at the top rather
than
the l to 1 1/2 turns in mentioned in the manual. Has anyone else
encountered
this?
73 Steve K8IDN
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
