Does your software have anything to do with this? Sent from my iPhone ...nr4c. bill
> On Jun 26, 2020, at 11:43 AM, John McBride <[email protected]> wrote: > > Thanks for the replies. I am not using split mode, and am trying to make the > change from USB to DATA A in the individual bands of 20 and 15 meters. Yes, > the change was made successfully for 40 meters from LSB to DATA A. Any thing > else I should check? Knowing me there is probably an easy answer. > > John > ________________________________ > From: Don Wilhelm <[email protected]> > Sent: Thursday, June 25, 2020 6:47 PM > To: John McBride <[email protected]>; [email protected] > <[email protected]> > Subject: Re: [Elecraft] K3 DATA setting > > John, > > Mode is a per band setting. So do not expect it to be 'sticky' from > band to band. > Once you go to the band for operation, you should be able to change the > mode. > > 73, > Don W3FPR > >> On 6/25/2020 6:14 PM, John McBride wrote: >> I am getting my K3 ready to use PSK31 on Field Day. 40 meters is configured >> for DATA A, but I can't change 20 or 15 meters from USB to DATA A. What >> direction or suggestion do you have to make this change. >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
