Pete,
Do you normally drive the audio to produce 4 bars solid with the 5th bar
flashing? That is often the problem with no or low RF output.
I do not have any answers on the Microkeyer II, someone else will have
to respond to that.
73,
Don W3FPR
On 6/29/2020 10:16 AM, Peter Chamalian wrote:
I'm running the K3S and Micro Keyer II. When I go on digital there are
times when the K3S appears to be putting out RF but there is none. When I
switch to CW all's well.
If I turn the K3S, Microkeyer II off and shut down the device router
software then turn it all back on, I get RF out on digital.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
