Are you following the instructions in the microHAM MK II Users Manual,
and the example configurations for MK II and your software?
When I go on digital there are times when the K3S appears to be
putting out RF but there is none.
What do you mean "appears to be putting out RF but there is none"?
What constitutes "apparent RF" - a Wattmeter indication, indicated
ALC of four bars, the TX LED?
73,
... Joe, W4TV
On 2020-06-29 10:16 AM, Peter Chamalian wrote:
I'm running the K3S and Micro Keyer II. When I go on digital there are
times when the K3S appears to be putting out RF but there is none. When I
switch to CW all's well.
If I turn the K3S, Microkeyer II off and shut down the device router
software then turn it all back on, I get RF out on digital.
Any ideas as to what's going on and what to do about it?
Pete, W1RM
[email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
