Basically the same thing. I suggest the Vectronics DL-650 (dx engineering) or a commercial pull from Ridge Equipment. For serious testing, I fire up my 2GHz, 6kW water-cooled dummy load--louder than 10 KPA-1500s on PCP.
Always get more capacity than you need. --because you'll need it later. If you get an amp, a high power dummy load is essential for tracking down possible RFI. I keep a 50-watt dummy load on ANT2 of the K3S for a quick TXGN CAL, and a DL-2500 on ANT2 of the KPA1500. But then, I love the smell of a hot dummy load in the morning. It smells like...radio. 73 Eric WD6DBM On Wed, Jul 1, 2020, 2:44 PM NJMike <mikekopa...@gmail.com> wrote: > I need to purchase a dummy load for use with my K2/100. What's the > difference between a dry dummy load and an air cooled dummy load? Which is > better? > > Thanks, > Mike NJ2OM > > > > -- > Sent from: http://elecraft.365791.n2.nabble.com/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to norrislawfi...@gmail.com > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
