I built three of them (144, 222, 432) and have used them with my K3 in my contest rover for several years. They are solid performers, and they work seamlessly with the K3.
Since they can be used with many kinds of radios in many configurations, there are a number of jumpers and connections you must set correctly to make them work in your specific setup. What radio are you using for the IF? Don’s advice is spot on (as always) - best to set up one at a time and remove some variables. 73 de W0ZF On Wed, Jul 8, 2020 at 8:34 PM Don Wilhelm <[email protected]> wrote: > Joe, > > Instead of daisy-chaining all the transverters, try connecting only one > at a time (you should be able to use the daisy-chain control cable, but > connect the TX and RX coax directly fron the K2/K3/K3S to the transverter. > > Then tell us what the particular problems are with each transveter. We > cannot give much advice on "It just does not work right". > > 73, > Don W3FPR > > > On 7/8/2020 8:10 PM, Joseph McIntire wrote: > > I have two I need some help with neither one works or ever did. I > believe I did every thing correct and believed something happened in trying > to set them up to do the alignment procedures. But the power indicator came > on till I hooked them up to do the alignment. I really cant see paying > shipping and $125 an hour to get something fixed that cost $369.00 new. But > they must be pretty fickle if one miss step in the setup takes them out. > Just hate to see $700. 00 go down the drain. > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
