You probably have the TX Monitor set to zero. Press and hold for 3 sec the Comp/Pwr knob. VFO B display will change to TX MON and show setting. Adjust as needed (2-5 should be in ballpark).
Sent from my iPhone ...nr4c. bill > On Jul 16, 2020, at 1:05 PM, John Stengrevics <jstengrev...@comcast.net> > wrote: > > When I send CW on my K3S, I cannot hear it either on the speaker or phones. > As most probably are, I am dependent on the auditory feedback to send CW > properly. > > I suspect I have a setting wrong. > > Any advice would be much appreciated. > > 73, > > John > WA1EAZ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com