Put the K3 in CW mode, then press and hold the CMP/PWR/MON knob, the
display will change to MON, that is your sidetone adjustment.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources
On 7/16/20 10:16 AM, Nr4c wrote:
You probably have the TX Monitor set to zero. Press and hold for 3 sec the
Comp/Pwr knob. VFO B display will change to TX MON and show setting. Adjust as
needed (2-5 should be in ballpark).
Sent from my iPhone
...nr4c. bill
On Jul 16, 2020, at 1:05 PM, John Stengrevics <[email protected]> wrote:
When I send CW on my K3S, I cannot hear it either on the speaker or phones.
As most probably are, I am dependent on the auditory feedback to send CW
properly.
I suspect I have a setting wrong.
Any advice would be much appreciated.
73,
John
WA1EAZ
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
