Are you certain you have connected to the PTT IN jack. If you just felt
your way behind the K3, you could have plugged into the KEY OUT jack
instead.
Make Jim's check on the voltage at the other end of an RCA cable, but as
an extra step, short that RCA cable and see if it lights the red TX LED.
73,
Don W3FPR
On 7/28/2020 6:50 PM, Jim Rhodes wrote:
When I check my PTT in port it shows about 4.75 V and 0.1 mA at the other
end of an RCA cable. What does yours read?
On Tue, Jul 28, 2020 at 5:33 PM kg6mzs <[email protected]> wrote:
Yes, when connected to the front panel jack, the PTT in the Kenwood
MC-60 works just fine.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [email protected]
