Ic I think you might be ok with a product like “JB Weld”. It’s a grey highly viscous Epoxy that can be molded into shape and machined when completely cured. Takes 24 hours to fully harden. Maybe 72 hours for full cure.
I’ve seen modelers repair broken engine lugs on a model engine. When cured, drill out the mounting hole and remount the engine and go flying. As for the little mounting pieces you can make them with a file or nobler. Sent from my iPhone ...nr4c. bill > On Aug 17, 2020, at 2:59 AM, Victor Rosenthal 4X6GP <[email protected]> > wrote: > > What do you think about epoxy-ing an Anderson Power Pole connector into a > 3mm aluminum panel? > > Would it be durable? > > I know there is a metal dohickey to mount an APP to a panel, but it's not > available here and I don't want to wait weeks. > > Or should I just go with a grommet and pigtail? > -- > 73, > Victor, 4X6GP > Rehovot, Israel > Formerly K2VCO > CWops no. 5 > http://www.qsl.net/k2vco/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to [email protected]
