On 8/17/2020 4:13 AM, Victor Rosenthal 4X6GP wrote: > Here is my Power Pole holder. It is just a piece of 1.6mm thick aluminum > with a notch in it. The notch is sized precisely to fit the groove in > the sides of the APP. I just drilled a few holes and filed it to size. > Then you make a slightly larger rectangular hole in the panel that will > pass the back part of the APP. All that's left is the mounting holes. > > Here's a picture (link is case-sensitive): > <https://www.qsl.net/k2vco/APP_Holder.jpg>
Nice job! 73 de K2ASP - Phil Kane (ex-4X4UQ - Ramat Gan, ISR) Elecraft K2/100 s/n 5402 >From a Clearing in the Silicon Forest Beaverton (Washington County) Oregon ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com